Yesterday morning I grouted the bowl. It’s a bit like making mud pies, in that you put a huge glop of grout on the side, then try to mash it in-between the tiles. Then you add another glop. There’s some water involved, vinyl gloves, sponges, cloths, etc. You cover the bowl generously, then start using the sponge to remove the excess. You want to end up with the space covered as evenly as possible with none left on the actual tiles.
I did this as much as possible yesterday. I’ll do a bit more clean up today, then paint on the sealer, and see if I can add just a bit of glitter. I’ll also cut a round piece of felt to glue on the bottom so that it won’t scratch furniture. I’ll take pics again when it’s finished.
I’m making this for a friend. What I’m picturing is that it will be a nice place to put a tea light and that it will glow through the pieces of glass.
All of the pieces of tile are now glued onto the glass. (This is the bowl upside-down. I’m planning to spread grout on the bottom so I can ‘sign’ it, using a baby trowel type tool.)
The next step is fun, labor-intensive, and quite messy – like playing in the mud or messing with play dough or finger painting.
I put grout all over the piece, making sure I get it all around all the pieces of glass tiles as evenly as possible. When that is done, I use warm water and a sponge, or cloth, or both, to wipe the piece to get all of the excess grout off the glass. This takes a lot of time, effort, and lots of warm, clean water. I have to get it completely cleaned up before the grout dries or it will be like trying to scrape cement off.
I’ll take pics when the grout is on and the piece cleaned up.